55
4.
Press the clips (Figure 59, pos 1) of each i-
power® 14 battery pack slightly towards
each other and lift it out.
5.
Charge the i-power 14 battery packs in the i-
charge® 9 battery charger. Please refer to
the user manual of the i-charge 9.
6.
Replace back the fully charged batteries.
When they "click" they are locked into
place.
7.
Pull out the locking pin on the left side
(Figure 58, pos 2) of the battery drawer.
8.
Push the battery drawer into the i-drive® by
the black handle (Figure 58, pos 1) until it
locks into place.
Figure 59
9.
Turn the ignition key to position "l".
10.
Wait a few seconds. The display should
indicate 100% and all 10 bars of the battery
level display should be visible
(Figure 60, pos 1). The i-drive is ready for a
new working cycle.
Figure 60
