40
7.3.2
Placing the squeegee body back on the squeegee lifting plate
1.
Position the squeegee body under the i-
drive®, line up the rotary knobs with the
cutouts in the squeegee lifting plate.
2.
Lift the squeegee lifting plate.
3.
Slide the rotary knob of the squeegee body,
the furthest away from you
(Figure 34, pos 1), into the cutout of the
squeegee lifting plate (Figure 34, pos 3).
Make sure to push it fully into the cutout.
4.
Tighten the rotary knob hand tight
(Figure 34, pos 1).
5.
Repeat for the rotary knob closest to you
(Figure 34, pos 2).
6.
Push the vacuum hose onto the hose
connector of the squeegee
(Figure 35, pos 1).
7.
Check that the vacuum hose fits tightly.
8.
Take place on the seat, behind the steering
wheel.
9.
Place the ignition key back in the keyhole.
Turn the ignition key to position "l". The
squeegee will move to its highest position.
10.
After a few seconds the text "Ready"
appears on the display (Figure 32, pos 2).
Figure 34
Figure 35
