i-team i-drive User Manual Download | Manualshive

Page: 3 / 66

background image

3

Preface

Thank you for choosing the i-drive®, the ride-on auto scrubber that cleans faster, cleaner, safer,
greener, and is better for everyone. The battery operated i-drive is equipped with two counter-
rotating disc brushes that provide a deep scrub and a great cleaning result. The i-drive significantly
decreases the amount of water and chemicals needed, which leads to a greener result and reduces
the risk of slippery floors.

Please read this manual carefully for important information and operating instructions before using
the i-drive. Save this manual for future reference. This i-drive will provide excellent performance. The
best results will be obtained when the i-drive is:

•

regularly maintained per the i-drive preventive maintenance instructions in this manual;

•

regularly serviced per service instructions in the service manual.

•

operated with reasonable care and caution;

•

maintained with manufacturer supplied parts.

Whenever

this manual refers to “the manufacturer”

, it means: Future Cleaning Technologies B.V.,

an

affiliate company of i-team

in Eindhoven, the Netherlands. Whenever

this manual mentions “the

partner

”

, it refers to your local i-team resell and support service partner.

Purpose of the user manual

The purpose of the user manual is to provide the user with information during the life of the i-drive
in such a way that the i-drive is used correctly, efficiently and safely, even in the event of reasonably
foreseeable misuse, as described in section 1.2 of this manual.

The user manual contains instructions regarding:

•

personal operator safety;

•

intended and non-intended use of the i-drive;

•

instructions for daily use;

•

maintenance instructions;

•

storage conditions;

•

disposal of the i-drive.

These instructions must be considered to avoid risks that could lead to physical and/or material
damage.

Target audience

This user manual is intended for operators of the i-drive and their supervisors, as well as partners
and importers.

Operators of the i-drive

The i-drive may only be operated by a person who:

•

has correctly read and understood the instructions in this manual;

•

is trained by an experienced operator who has read and understood the instructions in this
manual;

•

is trained on an i-drive before using it.

«
1
2
3
4
5
...
»

Summary of Contents for i-drive



































































Reviews:

No comments

Related manuals for i-drive

Brand: BZB Gear Pages: 12

BD 70 W Classic Bp

Brand: Kärcher Pages: 280

Brand: Eureka Pages: 44

Brand: Axminster Pages: 18

Brand: Kemper Pages: 477

Brand: ICE COBOTICS Pages: 53

BD 50/50 C Classic Bp Pack 80Ah Li

Brand: Kärcher Pages: 228

Brand: Abicor Binzel Pages: 100

Brand: Saber Compact Pages: 43

Brand: WilTec Pages: 3

Brand: Zubler Pages: 40

Brand: Tornado Pages: 20

Floorkeeper 20 OB/99120ORB

Brand: Tornado Pages: 32

Brand: Kränzle Pages: 92

Brand: Clemas & Co Pages: 30

Brand: Clemas & Co Pages: 33

Brand: Clemas & Co Pages: 32

Brand: Clemas & Co Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands