14
1100T Black
Using Your Decoder
Turning Your Decoder On / Off
First, switch on the TV set and any other connected equipment. Then, switch on your decoder by
pressing the
or
, or
buttons on the remote control. When the decoder comes out
of standby, the LED indicator on the front panel illuminates green and the receiver tunes to the last
viewed channel.
When you are not using your decoder, put it in standby mode by pressing the
button. When
the decoder is in standby mode, the LED indicator on the front panel illuminates red.
Basic Rule “Point & Select”
To use your decoder successfully, you need to know and “master” the “Point
and Select” rule. You will use this rule every time you go to the menus and
submenus of the decoder.
You “point” by pressing the arrow buttons on the remote control, which
moves the “on-screen” highlight to different items. Once you have pointed
to an item (highlighted an item) on the screen, select it by pressing the
button on the remote control.
You can also press the
button to go to the previous screen or
to close all the windows
(screens) and return to normal viewing.
Selecting Channels
You can tune to the desired channel in a few ways:
Press
to tune to the next channel and press
to tune to the previous channel.
Enter the number of the desired channel using the
keys. When you press a number button, the
Channel Number Entry Box
appears in the upper
right corner of the screen.
Press the
button, highlight the desired channel
and press
to tune to this channel.
Press the
button in order to display the
Channel Banner
. Then, browse through channels
using the
/
buttons. Press
to tune to the channel which name is displayed
in the
Channel Banner
.
1.
.
.
4.
Channel Number Entry Box
Summary of Contents for 1100T Black
Page 1: ......
