New R-Line Refuse Collection Micro
User Manual RCM10
53
4.12.1 Clean the rear edge safety latch movement zone.
ATTENTION
Before carrying out any operations, check the machine is safely stopped, disconnecting it
from the power supply and switching off the vehicle engine.
Recurrence: every 100 h.
Clean the safety latch movement zone and eliminate any waste residues that may have been deposited in
the area. Proceed as follows:
Remove the protection element (A) by unscrewing and removing the fastening screws that hold it in
place.
Eliminate any waste residues that may have been deposited in this area.
After having completed the cleaning operations, re-apply the protection element (A) and secure it in
place using the appropriate fastening screws.
Fig.5 - 1
