New R-Line Refuse Collection Micro
User Manual RCM10
25
3.10
Indicator plates on the machine
Introduction
There are various indicator/warning plates on every side of the machine; their
positioning is shown in figure 3-4 on the next page, and their aim is to inform
and warn operators of any residual risks or regulations to be observed.
Safety warnings
ATTENTION
It is absolutely forbidden to tamper with the indicator/warning
plates, or remove them.
The user's liability
ATTENTION
Regularly check the good condition of the indicator/warning
plates, replacing any damaged ones when necessary.
Position
Plate
Meaning
1
It is forbidden to pass or stand in the working range of the machine.
2
The use of Personal Protective Equipment is compulsory.
Table 3-2
Fig.3 - 3
