New R-Line Refuse Collection Micro
User Manual RCM10
41
Type of stop:
Emergency stop
Intervention
If any potential hazards are
posed to the operators, exposed
people, or the machine itself,
press the emergency stop button
(P) on the button panel inside the
cab or on-board the collection
tank to immediately stop all the
machine's functions.
Reset
To restart the machine functioning cycle after an emergency stop, you
must:
Solve or remove the fault causing the safety intervention.
Restore the safety conditions necessary to restart working.
Reset the red mushroom button that has been activated, by
turning it clockwise and checking it rises from the stop position.
Power on the electrical system by pressing the button (H) on the
control panel inside the cab.
Engage the power take-off as described in section 4.1.1
“Engaging the PTO”.
Press the buttons (or turn the selector switches) corresponding to
the interrupted function or movement, on the command panels in
the driving cab and on the collection tank.
Functioning will restart from the point in which it was interrupted.
