manualshive.com logo in svg

Hyundai NEXO 2019, Owner'S Manual

Share
Download
Hyundai NEXO 2019 Owner'S Manual Download Page 60

2-45

Saf

ety system of y

our v

ehicle

2

To install a child restraint system on
the rear seats, do the following:
1. Place the child restraint system on

a rear seat and route the lap/ shoul-
der belt around or through the child
restraint, following the restraint
manufacturer's instructions.
Be sure the seat belt webbing is
not twisted. Make sure to insert
the belt into the guide(1).

When using the rear center seat
belt, you should also refer to the
"Rear Seat Belt – Passenger's 3-
point system" section in this
chapter.

2. Fasten the lap/shoulder belt latch

into the buckle. Listen for the dis-
tinct "click" sound.

Information

Position the release button so that it is
easy to access in case of an emergency.

3. Pull the shoulder portion of the seat

belt all the way out. When the shoul-
der portion of the seat belt is fully
extended, it will shift the retractor to
the "Automatic Locking" (child
restraint) mode.

i

NOTICE

OLMB033045

OLMB033097

Summary of Contents for NEXO 2019

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands