manualshive.com logo in svg

Hyundai NEXO 2019, Owner'S Manual

Share
Download
Hyundai NEXO 2019 Owner'S Manual Download Page 150

3-63

Con

v

enient f

eatur

es of y

our v

ehicle

3

Range

• The range is the estimated dis-

tance the vehicle can be driven
with the remaining fuel.

• If the estimated distance is below

1 mi. (1 km), the trip computer will
display "---" as range.

• If the hydrogen supply line is empty,

the gauge may indicate that the
hydrogen is not in the hydrogen
tank.

Information 

• If the vehicle is not on level ground

or the battery power has been inter-
rupted, the range function may not
operate correctly.

• The range may differ from the actu-

al driving distance as it is only an
estimate of the available driving
range for the vehicle and driving
conditions.

• The range may vary significantly

based on driving conditions, driving
habits, and condition of the vehicle.

Gear shift indicator  

This indicator displays which gear is
selected.

i

OFE048108N

OFE048105

Summary of Contents for NEXO 2019

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands