manualshive.com logo in svg

Hyundai NEXO 2019, Owner'S Manual

Share
Download
Hyundai NEXO 2019 Owner'S Manual Download Page 277

5-11

Dri
ving y

our v

ehicle

Reduction Gear Operation

Select gear positions by pressing the
shift button.
For your safety, always depress the
brake pedal while shifting to another
gear.

Gear position

The indicator in the instrument clus-
ter displays the gear position when
the POWER button is in the ON posi-
tion.

R

RE

ED

DU

UC

CT

TIIO

ON

N  G

GE

EA

AR

R

5

To reduce the risk of serious
injury or death:

•

ALWAYS check the surround-
ing areas near your vehicle for
people, especially children,
before shifting a vehicle into
D (Drive) or R (Reverse).

•

Before leaving the driver's
seat, always make sure the
gear is in the P (Park) posi-
tion, then set the parking
brake, and place the POWER
button in the OFF position.
Unexpected and sudden vehi-
cle movement can occur if
these precautions are not fol-
lowed.

WARNING  

OFE058005L

OFE058006

Summary of Contents for NEXO 2019

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands