manualshive.com logo in svg

Hyundai NEXO 2019, Owner'S Manual

Share
Download
Hyundai NEXO 2019 Owner'S Manual Download Page 232

3-145

Con

v

enient f

eatur

es of y

our v

ehicle

3

Link with other Systems

Activation of other systems may be
restricted according to the circum-
stances while the RSPA system is in
activation. The systems linked to the
RSPA system are as follows:
1. Smart Cruise Control (SCC) sys-

tem

(1) SCC system can be operated at

the same time with the RSPA
system until the "Searching for
parking space" stage.

(2) The SCC system is deactivated

when the RSPA system enters
the "Remote Smart Parking
assist" stage.

(3) After the RSPA system is com-

plete or deactivated, the SCC
system maintains the deactiva-
tion status.

2. Auto Hold
(1) The activated Auto Hold is

switched to deactivation status
when the RSPA system is activat-
ed.

(2) The Auto Hold button will not

respond while the RSPA system
is in activation.

(3) After the RSPA system is com-

plete or deactivated, the Auto
Hold will return to the state before
the RSPA system was activated.

3. Electronic Stability Control (ESC) 
(1) Electronic Stability Control (ESC)

system switches from OFF to
activation status (ESC OFF but-
ton turns off) when the RSPA sys-
tem is activated.

(2) The ESC OFF button will not

respond while the RSPA system
is in activation.

(3) The ABS/TCS/ESC system acti-

vates while the RSPA is in activa-
tion.

(4) After the RSPA system is com-

plete or deactivated, ESC main-
tains the ON status.

Summary of Contents for NEXO 2019

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands