manualshive.com logo in svg

Hyundai NEXO 2019, Owner'S Manual

Share
Download
Hyundai NEXO 2019 Owner'S Manual Download Page 370

5-104

Driving your vehicle

• The driver starts driving by pushing

the toggle switch  up (RES+)/down
(SET-) or depressing the accelera-
tor pedal, after the vehicle is
stopped by the Smart Cruise
Control system with no other vehi-
cle ahead.

• The driver starts driving by pushing

the toggle switch  up (RES+)/down
(SET-) or depressing the accelera-
tor pedal, after stopping the vehicle
with a vehicle stopped far away in
front.

• The Forward Collision-Avoidance

Assist (FCA) is activated.

Each of these actions will cancel the
Smart Cruise Control operation. The
Set Speed and Vehicle-to-Vehicle
Distance on the LCD display will go
off.
In a condition the Smart Cruise
Control is cancelled automatically,
the Smart Cruise Control will not
resume even though the RES+ or
SET- toggle switch  is pushed.

Information

If the Smart Cruise Control is canceled
by other than the reasons mentioned,
have the system checked by an author-
ized HYUNDAI dealer.

Smart Cruise Control canceled

If the system is cancelled, the warn-
ing chime will sound and a message
will appear for a few seconds.
You must adjust the vehicle speed by
depressing the accelerator or brake
pedal according to the road condition
ahead and driving condition.
Always check the road conditions.
Do not rely on the warning chime.

i

OFE058172L

Summary of Contents for NEXO 2019

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands