Hyundai NEXO 2019 Owner'S Manual Download Page 127

Page: 127 / 560

3-40

Convenient features of your vehicle

Resetting the Sunroof

Sunroof needs to be reset if the fol-
lowing occurs :
- Battery is discharged or discon-

nected or the related fuse has been
replaced or disconnected

- The one-touch sliding function of

the sunroof does not normally oper-
ate

Reset procedure :
1. Place the POWER button to the

ON position or start the vehicle
(

indicator ON). It is recom-

mended to reset the sunroof while
the vehicle is in the ready (

)

mode.

2. Push the control lever forward.

The sunroof will close completely
or tilt depending on the condition
of the sunroof.

3. Release the control lever when

the sunroof stops moving.

4. Push the control lever forward

about 10 seconds.
-

When the sunroof is in the

closed position :

The glass will tilt and slightly

move up and down.

- When the sunroof is in the tilt

position:

The glass will slightly move up

and down.

Do not release the lever until the
operation is completed.
If you release the lever during opera-
tion, start the procedure again from
step 2.

5. Within 3 seconds, push and hold

the control lever forward until the
sunroof operates as follows:

Tilt down

→

Slide Open

→

Slide

Close.

Do not release the lever until the
operation is completed.
If you release the lever during opera-
tion, start the procedure again from
step 2.

6. Release the sunroof control lever

after all steps have completed. The
sunroof system has been reset.

Information

• If the sunroof is not reset when the

vehicle battery is disconnected or
discharged, or the sunroof fuse is
blown, the sunroof may not operate
normally.

• For more detailed information, con-

tact an authorized HYUNDAI dealer.

Summary of Contents for NEXO 2019

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NEXO 2019

Reviews:

Brands by name

Popular brands

Hyundai NEXO 2019, Owner'S Manual

Search results

Summary of Contents for NEXO 2019

Reviews:

Brands by name

Popular brands