Hyundai NEXO 2019 Owner'S Manual Download Page 25

Page: 25 / 560

2-10

Safety system of your vehicle

Seatback pocket

The seatback pocket is provided on
the back of the front passenger's
seatback.

Rear Seats

Rear seat adjustment

Seatback angle

To recline the seatback:
1. Pull up the seatback recline lever.
2. Hold the lever and adjust the seat-

back of the seat to the position
you desire.

3. Release the lever and make sure

the seatback is locked in place.

(The lever MUST return to its original
position for the seatback to lock.)

Do not put heavy or sharp
objects in the seatback pockets.
In an accident they could come
loose from the pocket and
injure occupants.

CAUTION

OFE038016N

To prevent the Occupant
Classification System from mal-
functioning:
Do not hang onto the front pas-
senger's seatback.

WARNING

OFE038012

Summary of Contents for NEXO 2019

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NEXO 2019

Reviews:

Related manuals for NEXO 2019

Brands by name

Popular brands

Hyundai NEXO 2019, Owner'S Manual

Search results

Summary of Contents for NEXO 2019

Reviews:

Related manuals for NEXO 2019

Brands by name

Popular brands