manualshive.com logo in svg

Hyundai NEXO 2019, Owner'S Manual

Share
Download
Hyundai NEXO 2019 Owner'S Manual Download Page 221

3-134

Convenient features of your vehicle

4. Smart exit instructions

• Follow the instructions on the

screen and press and hold the
RSPA button to select the Smart
Exit.

• To deactivate the Smart Exit, press

the ‘Cancel’ button on the screen or
the Parking Distance Warning but-
ton.

❈ 

The system still searches for the
exit space when the gear is shifted
to the other positions than R
(Reverse). However, the function
will be deactivated when the vehi-
cle moves.

5. Smart exit assist

• With the vehicle stopped, press

and hold the RSPA button and then
the steering wheel, gear shift and
vehicle speed are controlled auto-
matically.

OFE048145L

•

Always check the surrounding
before driving your vehicle if
the Parking Distance Warning
sound (distance from object
is within 12 in. (30 cm): con-
tinuous beep) is heard for the
object is close to your vehicle.

•

The function may be can-
celled if you attach something
(cover, etc.) to the steering
wheel.

•

The  function can be can-
celled for safety reasons if the
vehicle is parked at a small
space near a wall.

CAUTION

OFE048165N

OFE048166N

Summary of Contents for NEXO 2019

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands