manualshive.com logo in svg

Hyundai NEXO 2019, Owner'S Manual

Share
Download
Hyundai NEXO 2019 Owner'S Manual Download Page 422

6-25

W

hat to do in an emer

g

ency

6

When towing your vehicle in an
emergency without wheel dollies:
1. Place the POWER button in the

ACC position.

2. Place the shift button in N

(Neutral).

3. Release the parking brake.

Removable Towing  Hook

1. Open the liftgate, and remove the

towing hook from the tool case.

2. Remove the hole cover by press-

ing the lower part of the cover on
the front or rear bumper.

3. Install the towing hook by turning it

clockwise into the hole until it is
fully secured.

4. Remove the towing hook and

install the cover after use.

If your vehicle is equipped with
a rollover sensor, place the
POWER button in the LOCK/
OFF or ACC position when the
vehicle is being towed. The side
impact and curtain air bag may
deploy if the sensor detects the
situation as a rollover.

WARNING  

Failure to place the shift button
in N (Neutral) when being towed
with the front wheels on the
ground can cause internal dam-
age to the vehicle.

CAUTION

OFE068018

■

Front

OFE068019

■

Rear

Summary of Contents for NEXO 2019

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands