![background image](http://html1.mh-extra.com/html/hyundai/hsl1500t-track/hsl1500t-track_manual_2197029048.webp)
5. Oil Cooler and Cooling Fan
Oil returning from the control valve is circulated through
the oil cooler before being sent to other parts of the
hydraulic system.
An engine cooling fan drives air through the oil cooler
when the rear door is closed. Refer to Figure 4.7E.
The oil cooler should be checked daily for dirt buildup on
the cooling fins. If the air flow is restricted through the
cooling fins, overheating of the hydraulic system may
occur. Clean any dirt buildup with compressed air. Figure
4.7E shows the radiator setup for the loader.
6.
Brake Service Override
A service Override has been incorporated for use by
authorized dealers. The normal position of the plunger is
down and turned into the locked position (Fig. 4.7F).
To release the park brake, turn the release button counter
clockwise. Go to the rear of the machine and pressurize
the small quick coupler (Fig. 4.7G) to 218 PSI (15 Bar) to
release the park brake.
4. MAINTENANCE
Fig. 4.7E
C4241
Oil Cooler
Fan
To avoid eye injury
always use safety goggles
when cleaning with
compressed air.
WARNING
Fig. 4.7F
C3780
Fig. 4.7G
C3893
49
Quick Coupler
Brake
Valve
Summary of Contents for HSL1500T Track
Page 21: ...22...