Hyundai HSL1500T Track, Manual, Page: 12 / 80

13
2. 4 SEAT BAR
For operator protection the loader is equipped with a seat
bar.
The loader must be started with the operator seated in the
loader and the seat bar in the up position. To raise the seat
bar, lift up on the bar (Fig. 2.4A). In the up position, the
seat bar activates the parking brake.
When down (Fig. 2.4B), the seat bar releases the park
brake and the hydraulic controls of the lift and tilt circuits.
Before exiting the loader always check the controls by
cycling them to ensure that they are in the neutral position.
2. 5 REAR WINDOW
For emergency exiting of the loader, pull on the tag on the
top of the rear window to remove the rubber cord.
(Fig. 2.5). Push the rear window out of the rear of
the cab and exit through the opening.
2. CONTROLS
C4438 Fig. 2.4A
C4439
Fig. 2.4B
To avoid personal injury,
lower the lift arms, shut off
the engine, raise the seat bar
and cycle the lift arm and
bucket controls to ensure
they are locked. Then,
unlatch the seat belt and exit
the loader. Do not enter or
exit with the engine running
unless as specified in this
manual or under specific
service and backhoe
operating procedures.
WARNING
Seat Bar Up
Seat Bar Down
C4440
Fig. 2.5
Emergency Pull Tag