Hyundai HSL1500T Track, Manual, Page: 14 / 80

15
2. 7 LIFT ARM SUPPORTS
For your safety, the loader is equipped with lift arm
supports to be used while performing regular service or
maintenance work.
The lift arm supports, when extended, prevent the lift arms
from dropping if hydraulic pressure is relieved or the
boom controls are accidentally cycled.
To operate the lift arm supports, first remove any bucket or
attachment from the quick - tach, raise the lift arms to full
height and shut OFF the engine. Push the two lift arm
support pin handles located directly in front of the operator
at the top of the operator compartment (Fig. 2.7A) outward
extending the lift arm locking pins (Fig. 2.7B). Slowly
lower the lift arms down onto the pins. To retract the
support pins, first lift the lift arms off of the pins before
retracting.
Fully retract the lift arm
supports before raising
or lowering lift arms.
IMPORTANT
2. CONTROLS
C694
Fig. 2.7B
C3135
Fig. 2.7A
Lift Arm Support
C3949