Hyundai 20G-7, Service Manual

Page: 400 / 420

3-31
STARTING SYSTEM
L4GC355A
6. BRUSH
If the brush is worn out to the limit, replace the brush.
7. BRUSH HOLDER
Check continuity between the (+) side brush holder and the
base. If there is continuity, replace the brush holder
assembly.
L4GC354A
9. BRUSH REPLACEMENT
1) Remove the worn brush taking care not to damage the
pigtail.
2) For better welding, correct the pigtail end with a sand
paper.
3) Weld the pigtail end.
L4GC357A
L4GC356A
8. OVERRUNNING GLUTCH
1) Check the pinion and spline teeth for wear and damage
and replace it if necessary. Also, inspect the flywheel
for wear and damage.
2) Rotate the pinion. The pinion must be rotated clockwise
but counterclockwise.
Wear limit
Lock
Loosen
Marked surface
Pigtail
Welding
portion