Hyundai 20G-7, Service Manual

Page: 325 / 420

MAIN MOVING SYSTEM
2-42
L4GC045A
9. Install the cylinder head cover. Apply sealant as shown in
the illustration.
Cylinder head cover 0.8 ~ 1.0kg
·
m
Apply engine oil to the oil seal lip to help install the cylinder
head cover oil seal to the spark plug pipe smoothly.
CAUTION
•
Necessarily tighten the cylinder head cover bolt
to the specified torque.
If it is tightened too much, the head cover can
be deformed resulting in oil leaks and the head
cover bolt can be broken resulting in cylinder
head replacemen
t.
• When installing after head cover removing, nec-
essarily apply sealant to the head cover rear and
front portion.
• Because the head cover is made of plastic, take
care not to drop tools on the head cover upper
portion when removing/installing the engine
parts.
• When installing after head cover removing, af-
ter checking the head gasket for damage, re-
use it if it is normal.
• When applying/draining engine oil, take care not
to spill oil on the head cover upper surface, if
oil is spilled, wipe it out completely with a pa-
per and a rag.
10. Install the timing belt.
11. Install the timing belt cover.
L4GC071A
12. Install the spark plug center cover.
Cylinder head cover 0.8 ~ 1.0kg
·
m