Hyundai 2016 Tucson Owner'S Manual Download Page 596

Page: 596 / 642

7-83

Maintenance

• Always handle them carefully, and

avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids.

• Never touch the glass with bare

hands. Residual oil may cause the
bulb to overheat and burst when lit.

• A bulb should be operated only

when installed in a headlamp.

• If a bulb becomes damaged or

cracked, replace it immediately
and carefully dispose of it.

1. Open the hood.
2. Disconnect the negative battery

cable.

3. Remove the headlamp bulb cover

by turning it counterclockwise.

4. Disconnect the headlamp bulb

socket-connector.

5. Unsnap the headlamp bulb retain-

ing wire by pressing the end and
pushing it upward.

6. Remove the bulb from the head-

lamp assembly.

7. Install a new headlamp bulb and

snap the headlamp bulb retaining
wire into position by aligning the
wire with the groove on the bulb.

8. Connect the headlamp bulb sock-

et-connector.

9. Install the headlamp bulb cover by

turning it clockwise.

Information

The headlamp aiming should be
adjusted after an accident or after the
headlamp assembly is reinstalled at an
authorized HYUNDAI dealer.

OTLE075014

Summary of Contents for 2016 Tucson



































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Tucson

Reviews:

Related manuals for 2016 Tucson

Brands by name

Popular brands

Hyundai 2016 Tucson, Owner'S Manual

Search results

Summary of Contents for 2016 Tucson

Reviews:

Related manuals for 2016 Tucson

Brands by name

Popular brands