manualshive.com logo in svg

Hyundai 2016 Tucson, Owner'S Manual, Page: 439 / 642

Share
Download
Hyundai 2016 Tucson Owner'S Manual Download Page 439

5-55

Dri
ving y

our v

ehicle

If there is a problem with the BSD
system, a warning message will
appear and the light on the switch will
turn off. The system will turn off auto-
matically. Have your vehicle inspect-
ed by an authorized HYUNDAI deal-
er.

RCTA (Rear Cross Traffic Alert)

The Rear Cross Traffic Alert feature
monitors approaching cross traffic
from the left and right side of the
vehicle when your vehicle is moving
in reverse.

Operating conditions

To operate:
Go to the User Settings Mode
(Driving Assist) and select RCTA
(Rear Cross Traffic Alert) on the LCD
display 

(For more information,

refer to "LCD Display" in chapter
3.)

. The system will turn on and

standby to activate. The system will
activate when vehicle speed is below
6 mph (10 km/h) with the shift lever in
R (Reverse).

5

■ 

Type A

■ 

Type B

OLFH054434L/OTLE055040

■ 

Type A

■ 

Type B

OTLA055144/OTLA055145

Summary of Contents for 2016 Tucson



































































































































































































































































































































































































































































































































































































































































Reviews:

No comments