Hyundai 2016 Tucson Owner'S Manual Download Page 143

Page: 143 / 642

3-45

Con

enient f

eatur

es of y

our v

ehicle

• Periodically remove any dirt that

may accumulate on the sunroof
guide rail or between the sun-
roof and roof panel.

• Do not try to open the sunroof

when the temperature is below
freezing or when the sunroof is
covered with snow or ice, the
motor could be damaged.

Information

After the vehicle is washed or in a
rainstorm, be sure to wipe off any
water that is on the sunroof before
operating it.

To Reset the Sunroof

The sunroof may need to be reset if
the following conditions occur:
- The battery is discharged or dis-

connected or the sunroof fuse has
been replaced or disconnected

- The sunroof control lever is not

operating correctly

To reset the sunroof, perform the fol-
lowing steps:
1. Turn the engine on and close the

sunroof glass and sunshade com-
pletely.

2. Release the control lever.

3. Push and hold the sunroof control

lever forward (to close the sun-
shade) for about 10 seconds until
the sunroof moves slightly, then
release the control lever.

4. Push and hold the sunroof control

lever forward until the sunroof
operates as follows:

Sunshade Open

→

Glass Tilt Open

→

Glass Slide Open

→

Glass Slide

→

Sunshade Close

Then, release the control lever.

When this is complete, the sunroof
system is reset.

For more information, contact an
authorized HYUNDAI dealer.

Information

If you do not reset the sunroof, it may
not work properly.

NOTICE

OTL045031

Summary of Contents for 2016 Tucson



































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Tucson

Reviews:

Related manuals for 2016 Tucson

Brands by name

Popular brands

Hyundai 2016 Tucson, Owner'S Manual

Search results

Summary of Contents for 2016 Tucson

Reviews:

Related manuals for 2016 Tucson

Brands by name

Popular brands