Hyundai 2016 Tucson Owner'S Manual Download Page 592

Page: 592 / 642

7-79

Maintenance

1. Open the hood.
2. Disconnect the negative battery

cable.

3. Remove the headlamp bulb cover

by turning it counterclockwise.

4. Disconnect the headlamp bulb

socket-connector.

5. Unsnap the headlamp bulb retain-

ing wire by pressing the end and
pushing it upward.

6. Remove the bulb from the head-

lamp assembly.

7. Install a new headlamp bulb and

snap the headlamp bulb retaining
wire into position by aligning the
wire with the groove on the bulb.

8. Connect the headlamp bulb sock-

et-connector.

9. Install the headlamp bulb cover by

turning it clockwise.

Information

The headlamp aiming should be
adjusted after an accident or after the
headlamp assembly is reinstalled at an
authorized HYUNDAI dealer.

Turn signal lamp

1. Open the hood.
2. Disconnect the negative battery

cable.

3. Remove the socket from the

assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.

4. Remove the bulb from the socket

by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.

OTLE075013

■

High/Low beam

Low

High

OTLE075019

Summary of Contents for 2016 Tucson



































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Tucson

Reviews:

Related manuals for 2016 Tucson

Brands by name

Popular brands

Hyundai 2016 Tucson, Owner'S Manual

Search results

Summary of Contents for 2016 Tucson

Reviews:

Related manuals for 2016 Tucson

Brands by name

Popular brands