manualshive.com logo in svg

Hyundai 2016 Tucson, Owner'S Manual, Page: 508 / 642

Share
Download
Hyundai 2016 Tucson Owner'S Manual Download Page 508

6-21

W

hat to do in an emer

g

ency

6

When the original tire and wheel
are repaired and reinstalled on the
vehicle, the lug nut torque must be
set correctly. The correct lug nut
tightening torque is 65-79 lb.ft (9-
11 kg.m).

NOTICE

To prevent damaging the com-
pact spare tire and your vehicle:

•

Drive slowly enough for the
road conditions to avoid all
hazards, such as a potholes
or debris.

•

Avoid driving over obstacles.
The compact spare tire diame-
ter is smaller than the diame-
ter of a conventional tire and
reduces the ground clearance
approximately 1 inch (25 mm).

•

Do not use tire chains on the
compact spare tire. Because
of the smaller size, a tire chain
will not fit properly.

•

Do not use the compact spare
tire on any other wheels, nor
should standard tires, snow
tires, wheel covers or trim
rings be used with the com-
pact spare wheel.

CAUTION

Summary of Contents for 2016 Tucson



































































































































































































































































































































































































































































































































































































































































Reviews:

No comments