manualshive.com logo in svg

Hyundai 2016 Tucson, Owner'S Manual, Page: 149 / 642

Share
Download
Hyundai 2016 Tucson Owner'S Manual Download Page 149

3-51

Con

v

enient f

eatur

es of y

our v

ehicle

Non-Powered liftgate

Opening the liftgate

• The liftgate is locked or unlocked

when all doors are locked or
unlocked with the key, transmitter,
smart key or central door lock
switch.

• If unlocked, the liftgate can be

opened by pressing the handle
switch and pulling up on the handle.

• Only the liftgate is unlocked if the

liftgate unlock button on the trans-
mitter or smart key is pressed for
about 1 second, or the liftgate
handle button is pressed when the
smart key is detected.

In cold and wet climates, door lock
and door mechanisms may not
work properly due to freezing con-
ditions.

Closing the liftgate

To close the liftgate, lower and push
down the liftgate firmly. Make sure
that the liftgate is securely latched.

NOTICE

L

LIIF

FT

TG

GA

AT

TE

E

3

OTL045036

The liftgate swings upward.
Make sure no objects or people
are near the rear of the vehicle
when opening the liftgate.

WARNING  

Make certain that you close the
liftgate before driving your vehi-
cle. Possible damage may occur
to the liftgate lift cylinders and
attached hardware if the liftgate
is not closed prior to driving.

CAUTION

OTL045037

Summary of Contents for 2016 Tucson



































































































































































































































































































































































































































































































































































































































































Reviews:

No comments