manualshive.com logo in svg

Hyundai 2016 Tucson, Owner'S Manual, Page: 56 / 642

Share
Download
Hyundai 2016 Tucson Owner'S Manual Download Page 56

2-29

Saf

ety system of y

our v

ehicle

2

4. Pull the large tongue plate and

insert it into the seat belt buckle
(E) located on the left hand (driv-
er) side of the center seat. Insert
the buckle until an audible "click"
is heard, indicating that the latch is
locked. Make sure the belt is not
twisted.

When using the rear center seat belt,
the buckle with the "CENTER" mark
must be used.

Information 

If you are not able to pull out the safe-
ty belt from the retractor, firmly pull
the belt out and release it. After
release, you will be able to pull the belt
out smoothly.

To release your seat belt: 

Press the release button (1) in the
locking buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen,
check the belt to be sure it is not twist-
ed, then try again.

To release the rear center seat-
belt 

1. Press the release button on the

rear center seat belt buckle (E)
located on the left hand (driver)
side of the center seat and
remove the large tongue plate (C).

i

OTLE035084

OTL035114

Summary of Contents for 2016 Tucson



































































































































































































































































































































































































































































































































































































































































Reviews:

No comments