manualshive.com logo in svg

Hyundai 2010 Sonata, Owner'S Manual

The Hyundai 2010 Sonata Owner's Manual is a comprehensive guide that provides users with essential information about their vehicle. Packed with detailed instructions and helpful tips, this manual ensures a smooth and enjoyable driving experience. Download your free copy from manualshive.com and unleash the full potential of your Hyundai Sonata.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

27

!

!

This label also tells you the maximum
weights that can be supported by the
front and rear axles, called Gross Axle
Weight Rating (GAWR). To find out the
actual loads on your front and rear
axles, you need to go to a weigh station
and weigh your vehicle. Your dealer can
help you with this. Be sure to spread out
your load equally on the left and right
sides of the centerline.

   WARNING:

o Never exceed the GVWR for your

vehicle, the GAWR for either the
front or rear axle and vehicle ca-
pacity weight. Exceeding these rat-
ings can cause an accident or
vehicle damage. You can calcu-
late the weight of your load by
weighing the items (or people)
before putting them in the vehicle.
Be careful not to overload your
vehicle.

   WARNING:

o Do not load your vehicle any

heavier than the GVWR, either the
maximum front or rear GAWR and
vehicle capacity weight.  If you do,
parts, including tires on your ve-
hicle can break, and it can change
the way your vehicle handles and
braking ability. This could cause
you to lose control and crash.
Also, overloading can shorten the
life of your vehicle.

C190G03JM-AAT

Certification Label

The certification label is located on the
driver's side center pillar outer panel.

The label shows the maximum allow-
able weight of the fully loaded vehicle.
This is called the GVWR (Gross Ve-
hicle Weight Rating). The GVWR in-
cludes the weight of the vehicle, all
occupants, fuel and cargo.

C190G01A

Summary of Contents for 2010 Sonata






























































































































































































































































































Reviews:

No comments

Related manuals for 2010 Sonata

Qube AP1 Supplemental Instructions preview
AP1
Brand: Qube Pages: 19
Cadillac 2000 Warranty And Owner Assistance Information preview
2000
Brand: Cadillac Pages: 32
Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
Mobile Create MCM3 Instruction Manual preview
MCM3
Brand: Mobile Create Pages: 15
Tachosys digidl Installation Manual preview
digidl
Brand: Tachosys Pages: 28
Whispbar K919W Fitting Instructions Manual preview
K919W
Brand: Whispbar Pages: 17
Ford 2005 P207 Explorer Sport Trac Owner'S Manual preview
2005 P207 Explorer Sport Trac
Brand: Ford Pages: 540
Westin 22-1065 Instructions preview
22-1065
Brand: Westin Pages: 3
POOL-LINE 110050 Assembly Instructions preview
110050
Brand: POOL-LINE Pages: 2
Classic AutoAir Mustang 1969 Installation Manual preview
Mustang 1969
Brand: Classic AutoAir Pages: 44
Tactik Tube Doors Installation & Use Instructions preview
Tube Doors
Brand: Tactik Pages: 4
banks 61410 Owner'S Manual preview
61410
Brand: banks Pages: 76
Edelbrock 67312 Installation Instructions preview
67312
Brand: Edelbrock Pages: 2
Metra Electronics 99-6510 User Manual preview
99-6510
Brand: Metra Electronics Pages: 17
Fiat FIORINO Owner'S Handbook Manual preview
FIORINO
Brand: Fiat Pages: 220
Camcar 40072 Mounting Instructions preview
40072
Brand: Camcar Pages: 2
Cadillac XT4 2023 Owner'S Manual preview
XT4 2023
Brand: Cadillac Pages: 362

Brands by name

Popular brands

Load more brands