manualshive.com logo in svg

Hyundai 2010 Sonata, Owner'S Manual

The Hyundai 2010 Sonata Owner's Manual is a comprehensive guide that provides users with essential information about their vehicle. Packed with detailed instructions and helpful tips, this manual ensures a smooth and enjoyable driving experience. Download your free copy from manualshive.com and unleash the full potential of your Hyundai Sonata.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

55

B260L02HP-GAT

Door Ajar Warning Light and
Chime

The door ajar warning light warns you that
a door is not completely closed and the
chime warns you that the key is in the
ignition switch.

NOTE :

The warning chime only sounds
whenever the key is in the ignition switch
and the driver's side front door is open
simultaneously. The chime sounds until
the key is removed from the ignition
switch or the driver's side front door is
closed.

B260M01A-AAT

Low Fuel Level Warning Light

The low fuel level warning light comes on
when the fuel tank is approaching empty.
When it comes on, you should add fuel as
soon as possible. Driving with the fuel
level warning light on or with the fuel level
below "E" can cause the engine to misfire
and damage the catalytic converter.

B260N02A-AAT

Check Engine - Malfunction

Indicator Light (MIL)

This light illuminates when there is a
malfunction of an exhaust gas related
component, and the system is not
functioning properly so that the exhaust
gas regulation values are not satisfied. This
light will also illuminate when the ignition key
is turned to the "ON"  position, and will go out
in a few seconds after the engine is started.
If it illuminates while driving, or does not
illuminate when the ignition key is turned to
the "ON" position, take your car to your
nearest authorized Hyundai dealer and have
the system checked.

!

B260P02Y-GAT

ABS Service Reminder
Indicator (SRI) (If Installed)

When the key is turned to the "ON" position,
the Anti-Lock Brake System indicator will
come on and then go off in a few seconds.
If the ABS SRI remains on, comes on while
driving, or does not come on when the key
is turned to the "ON" position, this indicates
that there may be a problem with the ABS.
If this occurs, have your vehicle checked
by your Hyundai dealer as soon as
possible. The normal braking system will
still be operational, but without the
assistance of the anti-lock brake system.

   WARNING:

If both the ABS SRI and Parking Brake/
Brake fluid level warning lights remain
"ON" or come on while driving, there
may be a problem with E.B.D. (Electronic
Brake Force Distribution).
If this occurs, avoid sudden stops and
have your vehicle checked by your
Hyundai dealer as soon as possible.

Summary of Contents for 2010 Sonata






























































































































































































































































































Reviews:

No comments

Related manuals for 2010 Sonata

AC Schnitzer F40 Fitting Instructions Manual preview
F40
Brand: AC Schnitzer Pages: 16
Kargo Master 40020 Assembly Manual preview
40020
Brand: Kargo Master Pages: 6
Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
Prorack K748 Fitting Instructions Manual preview
K748
Brand: Prorack Pages: 14
Whispbar K611W Fitting Instructions Manual preview
K611W
Brand: Whispbar Pages: 77
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
Jeep GLADIATOR 2022 Owner'S Manual preview
GLADIATOR 2022
Brand: Jeep Pages: 380
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
aci ADARAC Aluminum M Series Installation Instructions Manual preview
ADARAC Aluminum M Series
Brand: aci Pages: 16
Imiola HAK-POL O/018 Quick Manual preview
O/018
Brand: Imiola HAK-POL Pages: 3
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Havis C-DMM-3005 Installation Instructions preview
C-DMM-3005
Brand: Havis Pages: 5
Ford FUSION 2014 Owner'S Manual preview
FUSION 2014
Brand: Ford Pages: 458
Rydeen BSS2 Owner'S Manual preview
BSS2
Brand: Rydeen Pages: 14
Edelbrock Turbocharger 15012 Installation Instructions preview
Turbocharger 15012
Brand: Edelbrock Pages: 1
GMC Yukon XL Denali 2015 Owner'S Manual preview
Yukon XL Denali 2015
Brand: GMC Pages: 439
TracRac TracVan Double Installation Instructions Manual preview
TracVan Double
Brand: TracRac Pages: 6

Brands by name

Popular brands

Load more brands