manualshive.com logo in svg

Hyundai 2010 Sonata, Owner'S Manual, Page: 99 / 285

Share
Download
Hyundai 2010 Sonata Owner'S Manual Download Page 99

1

FEATURES OF YOUR HYUNDAI

86

!

   WARNING:

o If a person becomes locked in the

trunk, pull the emergency trunk
release lever of the inside panel in the
trunk to open the trunk lid.

o Keep cars locked and keys out of the

reach of children.  HYUNDAI recom-
mends parents teach children about
the emergency trunk release lever in
their vehicle and how to open the trunk
lid if they are accidentally locked in
the trunk.

ONF049132

B540B03E-AAT

Trunk Lid Emergency Latch Release

Your vehicle is equipped with a glow-in-
the dark emergency trunk release lever
located inside the trunk. It will glow after the
trunk is closed. When pulled, this lever will
release the trunk latch mechanism and
open the trunk.

!

   WARNING:

The trunk lid should always be kept com-
pletely closed while the vehicle is in
motion. If it is left open or ajar, poisonous
exhaust gases may enter the car and
serious illness or death may result. See
additional warnings concerning exhaust
gases on page 2-2.

TRUNK LID

B540A01S-AAT

Remote Trunk Lid Release

To open the trunk lid, pull up the lid release
lever.
To close, lower the trunk lid, then press
down on it until it locks. To be sure the trunk
lid is securely fastened, always check by
trying to pull it up again.

ONF048010L

Type A

Type B

Summary of Contents for 2010 Sonata






























































































































































































































































































Reviews:

No comments