Hyundai 2010 Sonata Owner'S Manual Download Page 103

Page: 103 / 285

FEATURES OF YOUR HYUNDAI

B600B01NF-GAT

Tilt and telescopic type
(If Installed)

To adjust the steering wheel:

1. Push the lever downward fully to unlock.
2. Adjust upward or downward and

forward or backward to set the steering
wheel to the desired position.

3. After adjustment, securely tighten the

lever by pulling it upward.

ONF048031

STEERING WHEEL

B600A01NF-GAT

Tilt type

To adjust the steering wheel:

1. Pull the lever toward you and hold it to

unlock.

2. Raise or lower the steering wheel to the

desired position.

3. After adjustment, release the lever.

ONF048114

B500B01B-GAT

Illuminated Vanity Mirror

Opening the lid of the vanity mirror will
automatically turn on the mirror light.

HNF2172

WARNING:

o Do not place the sun visor in such a

manner that it obscures visibility of
the roadway, traffic or other objects.

o Do not move the sun visor out to cover

the side window if there is an item
attended to it such as a garage door
remote control, pens, air fresheners
or the like. These objects could cause
injury if the curtain airbag is deployed.

Summary of Contents for 2010 Sonata






























































































































































































































































































Search results

Summary of Contents for 2010 Sonata

Reviews:

Related manuals for 2010 Sonata

Brands by name

Popular brands

Hyundai 2010 Sonata, Owner'S Manual

Search results

Summary of Contents for 2010 Sonata

Reviews:

Related manuals for 2010 Sonata

Brands by name

Popular brands