background image

1

FEATURES OF YOUR HYUNDAI

17

B080E01Y-AAT

Lumbar Support Control
(Driver's Seat Only) (If Installed)

To adjust the lumbar support, turn the
handle on the outboard or left side of the
seat. To increase the amount of lumbar
support, pull the lever forward. To decrease
it, push the lever toward the rear.

1. Minimum support
2. Maximum support

ONF038006

2

B090A02Y-AAT

POWER DRIVER'S SEAT (If Installed)

The driver's seat can be adjusted by using
the control knobs on the left side of the seat.
Before driving, adjust the seat to the proper
position so  as to easily control the steering
wheel, pedals and switches on the
instrument panel.

   CAUTION:

Do not operate two knobs at the same
time.

!

B080F01NF-GAT

Seat Height Adjustment
(Driver's Seat Only)

To raise or lower the seat, raise or lower the
control lever to the desired seat height.

ONF038004

1

B083D01NF-AAT

Active Headrests

The active headrest is designed to move
forward and upward during a rear impact.
This helps to prevent the driver's and front
passenger's head from moving backward
and thus helps prevent neck injuries.

HNF2041-1

Summary of Contents for 2010 Sonata






























































































































































































































































































Reviews: