manualshive.com logo in svg

Hyundai 2010 Sonata, Owner'S Manual

The Hyundai 2010 Sonata Owner's Manual is a comprehensive guide that provides users with essential information about their vehicle. Packed with detailed instructions and helpful tips, this manual ensures a smooth and enjoyable driving experience. Download your free copy from manualshive.com and unleash the full potential of your Hyundai Sonata.

Share
Download
background image

4

CORROSION PREVENTION AND APPEARANCE CARE

5

CLEANING THE INTERIOR

E040A01A-AAT

To Clean the Vinyl Upholstery

To clean the vinyl upholstery, first remove
loose dirt and dust with a vacuum cleaner.
Then apply a solution of mild soap or
detergent and water using a clean sponge
or soft cloth. Allow this to stay on the surface
to loosen the dirt, then wipe with a clean
damp sponge or cloth. If all the dirt stains
are not removed, repeat this procedure
until the upholstery is clean. Do not use
gasoline, solvent, paint thinner or other
strong cleaners.

E030E01A-AAT

Maintaining Bumpers

Special precautions must be observed to
preserve the appearance of the bumpers
on your Hyundai. They are:

o Be careful not to spill battery electrolyte

or hydraulic brake fluid on the bumpers.
If you   do, wash it off immediately with
clean water.

o Be gentle when cleaning the bumper

sur-faces. They are made of soft plastic
and the surface can be damaged if
mistreated. Do not use abrasive
cleaners. Use warm water and mild
soap or car-washing solution.

o Do not expose the bumpers to high tem-

peratures. For example, if you have
your car repainted, do not leave the
bumpers on  the car if the car is going to
be placed in a high-temperature paint
booth.

E030D01A-AAT

When to Wax Again

You should polish and wax the car again
when water no longer beads on a clean
surface but spreads out over a larger area.

E030C01A-AAT

Polishing and Waxing

Always wash and dry the car before
polishing or waxing or using a combination
cleaner and wax. Use a good quality
commercial product  and follow the
manufacturer's directions on the container.
Polish and wax the bright trim pieces as
well as the paint.

E030B01A-AAT

Spot Cleaning

Don't use gasoline, strong solvents or cor-
rosive cleaning agents. These can
damage the finish of the car. To remove
road tar, use turpentine on a clean, soft
cloth. Be gentle.
To remove dead insects or tree sap, use
warm water and mild soap or car-washing
solution. Soak the spot and rub gently. If
the paint has lost its luster, use a
commercial car-cleaning polish.

Summary of Contents for 2010 Sonata






























































































































































































































































































Reviews:

No comments

Related manuals for 2010 Sonata

Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
GARO ENTITY PRO Installation preview
ENTITY PRO
Brand: GARO Pages: 2
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
Saab 92X Owner'S Manual preview
92X
Brand: Saab Pages: 445
Wagan Wireless Handsfree Car Kit User Manual preview
Wireless Handsfree Car Kit
Brand: Wagan Pages: 20
Q Mobility Group Q Access Alpha GSE 2023 Installation Manual preview
Q Access Alpha GSE 2023
Brand: Q Mobility Group Pages: 9
Jaeger J05252127 Fitting Instructions Manual preview
J05252127
Brand: Jaeger Pages: 17
Simplicity 1694286 Installation Instructions Manual preview
1694286
Brand: Simplicity Pages: 10
Mercedes-Benz CLS 2015 Operator'S Manual preview
CLS 2015
Brand: Mercedes-Benz Pages: 398
Mopar 77072498AB Manual preview
77072498AB
Brand: Mopar Pages: 18
Lexus 2010 RX 350 Warranty And Services Manual preview
2010 RX 350
Brand: Lexus Pages: 82
Rhino-Rack S400-FK2 Instructions preview
S400-FK2
Brand: Rhino-Rack Pages: 2
SpeedTech Lights STL Boss Quick Start Manual preview
STL Boss
Brand: SpeedTech Lights Pages: 2
Quadratec QRC Installation Manual preview
QRC
Brand: Quadratec Pages: 8
Dacia Duster Driver'S Handbook Manual preview
Duster
Brand: Dacia Pages: 244
Baseus CRJS01 User Manual preview
CRJS01
Brand: Baseus Pages: 5

Brands by name

Popular brands

Load more brands