manualshive.com logo in svg

Hyundai 2010 Sonata, Owner'S Manual, Page: 261 / 285

Share
Download
Hyundai 2010 Sonata Owner'S Manual Download Page 261

8

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS

3

I030A03NF-AAT

RECOMMENDED COLD TIRE INFLA-
TION PRESSURES

Tire label located on the driver's side
center pillar outer panel gives the cold
tire pressures recommended for your
vehicle with the original tire size, the
number of people that can be in your
vehicle and vehicle capacity weight.

I030A01NF-A

Type B

ONF050301N

ONF050300N

Type A

These pressures were chosen to pro-
vide the most satisfactory combination
of ride comfort, tire wear and stability
under normal conditions. Tire pressures
should be checked at least monthly.
Proper tire inflation pressures should
be maintained for these reasons:

Summary of Contents for 2010 Sonata






























































































































































































































































































Reviews:

No comments