manualshive.com logo in svg

Hyundai 2008 Tiburon, Owner'S Manual

The Hyundai 2008 Tiburon Owner's Manual is an essential resource for all Tiburon owners. This comprehensive manual covers every aspect of the vehicle, providing detailed information on maintenance, operation, and safety procedures. Download your free manual from manualshive.com and unlock a wealth of knowledge for your Hyundai Tiburon.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

51

The brake fluid level warning light indicates that
the brake fluid level in the brake master cylinder
is low and hydraulic brake fluid conforming to
DOT 3 or DOT 4 specifications should be
added. After adding fluid, if no other trouble is
found, the car should be immediately and care-
fully driven to a Hyundai dealer for inspection.
If further trouble is experienced, the vehicle
should not be driven at all but  taken to a dealer
by a professional towing service.
Your Hyundai is equipped with dual-diagonal
braking systems. This means you still have
braking on two wheels even if one of the dual
systems should fail. With only one of the dual
systems working, more than normal pedal travel
and greater pedal pressure are required to stop
the car. Also, the car will not stop in as short a
distance with only half of the brake system
working. If the brakes fail while you are driving,
shift to a lower gear for additional engine braking
and stop the car as soon as it is safe to do so.

B260Q01E-GAT

CRUISE Indicator Light
(If Installed)

The cruise indicator light in the instrument clus-
ter is illuminated when the cruise control main
switch on the end of the barrel is pushed.
The indicator light does not illuminate when the
cruise control main switch is pushed a second
time.
Information about the use of cruise control is
beginning on page 1-80.

B260R01E-GAT

CRUISE SET Indicator Light

(If installed)

The set indicator light in the instrument cluster
is illuminated when the cruise control switch is
pushed downward to "SET (COAST)".
The set indicator light does not illuminate when
the control switch is in the "CANCEL" position.

B260K01F-AAT

Tail Gate Open Warning Light

This light remains on unless the tail gate is
completely closed and latched.

B260L02HP-GAT

Door Ajar Warning Light and
Chime

The door ajar warning light warns you that a door
is not completely closed and the chime warns
you that the key is in the ignition switch.

NOTE :

The warning chime only sounds whenever
the key is in the ignition switch and the
driver's side front door is open simulta-
neously. The chime sounds until the key is
removed from the ignition switch or the
driver's side front door is closed.

Summary of Contents for 2008 Tiburon













































































































































































































































































Reviews:

No comments

Related manuals for 2008 Tiburon

Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
HUSKY LINERS X-ACT CONTOUR 53491 Care And Use Instructions preview
X-ACT CONTOUR 53491
Brand: HUSKY LINERS Pages: 2
Volvo 30728293 Installation Instructions Manual preview
30728293
Brand: Volvo Pages: 19
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
JANE StrataPlatform Instructions Manual preview
StrataPlatform
Brand: JANE Pages: 58
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
Omix-Ada Alloy Rugged Ridge X-Clamp Manual preview
Alloy Rugged Ridge X-Clamp
Brand: Omix-Ada Pages: 2
Dodge 8W-70 Wiring Diagram preview
8W-70
Brand: Dodge Pages: 3
Aries 205039 Installation Manual preview
205039
Brand: Aries Pages: 5
Mercedes-Benz MY17 c-class Operator'S Manual preview
MY17 c-class
Brand: Mercedes-Benz Pages: 354
Gator GT700SD User Manual preview
GT700SD
Brand: Gator Pages: 6
F.lli Menabo CROSS 2 Assembly Instructions Manual preview
CROSS 2
Brand: F.lli Menabo Pages: 16

Brands by name

Popular brands

Load more brands