manualshive.com logo in svg

Hyundai 2008 Tiburon, Owner'S Manual, Page: 113 / 268

Share
Download
Hyundai 2008 Tiburon Owner'S Manual Download Page 113

1

FEATURES OF YOUR HYUNDAI

101

!

CAUTION:

o Replace the filter every 10,000 miles

(15,000 km) or once a year. If the car is
being driven in severe conditions such
as dusty, rough roads, more frequent
climate control air filter inspections and
changes are required.

o When the air flow rate is decreased, the

system should be checked at an autho-
rized dealer.

CLIMATE CONTROL AIR FILTER
(IN FRONT OF BLOWER UNIT)

B760A06GK-AAT

The climate control air filter is located in front of
the blower unit behind the glove box.
It operates to decrease the amount of pollutants
entering the car.
To replace the climate control air filter, refer to
the page 6-16.

B760A01E

Evaporator core

Filter

Heater core

Outside air

Inside air

Inside air

Blower fan

Summary of Contents for 2008 Tiburon













































































































































































































































































Reviews:

No comments