manualshive.com logo in svg

Hyundai 2008 Tiburon, Owner'S Manual

The Hyundai 2008 Tiburon Owner's Manual is an essential resource for all Tiburon owners. This comprehensive manual covers every aspect of the vehicle, providing detailed information on maintenance, operation, and safety procedures. Download your free manual from manualshive.com and unlock a wealth of knowledge for your Hyundai Tiburon.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

27

!

WARNING:

o If the retractor is not in the Automatic

Locking mode, the child restraint can
move when your vehicle turns or stops
suddenly.  A child can be seriously in-
jured or killed if the child restraint is not
properly anchored to the car, including
setting the retractor to the Automatic
Locking mode.

o Do not install any child restraint system

in the front passenger seat. Should an
accident occur and cause the passenger
side airbag to deploy, it could severely
injure or kill an infant or child seated in
an infant or child seat. Therefore, only
use a child restraint system in the rear
seat of your vehicle.

If the retractor is in the automatic locking mode,
the belt will be locked. After installation of the
child restraint system, try to move it in all
directions to be sure the child restraint system
is securely installed. If you need to tighten the
belt, pull more webbing toward the retractor.
When you unbuckle the seat belt and allow it to
retract, the retractor will automatically revert
back to its normal seated passenger emer-
gency locking usage condition.

NOTE:

o Before installing the child restraint sys-

tem in any seating position, read the
instructions supplied by the child re-
straint system manufacturer.

o If the seat belt does not operate as de-

scribed, have the system checked imme-
diately by your authorized Hyundai
dealer.

B230G02O-AAT

Child Restraint System Installation on
outboard Rear Seats

To install a child restraint system in the outboard
rear seats, extend the shoulder/lap belt entirely
from its retractor until a "click" is felt. This will
engage the seat belt retractor automatic locking
feature, which allows the seat belt to retract but
not extend. Install the child restraint system,
buckle the seat belt and allow the seat belt to
take up any slack. Make sure that the lap portion
of the belt is tight around the child restraint
system and the shoulder portion of the belt is
positioned so that it can not interfere with the
child's head or neck. Also, double check to be
sure that the retractor has engaged the auto-
matic locking feature by trying to extend web-
bing out of the retractor.

On outboard rear seats

HGK1010

Summary of Contents for 2008 Tiburon













































































































































































































































































Reviews:

No comments

Related manuals for 2008 Tiburon

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
Zavoli Bora Technical Instructions And Installation Manual preview
Bora
Brand: Zavoli Pages: 26
Yakima K831 Manual preview
K831
Brand: Yakima Pages: 8
TATA Motors tigor Owner'S Manual preview
tigor
Brand: TATA Motors Pages: 159
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Brand: Jeep Pages: 136
Paccar DAF CHARGEMAX 90 User Manual preview
DAF CHARGEMAX 90
Brand: Paccar Pages: 40
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288
Metra Electronics 99-3305 Installation Instructions Manual preview
99-3305
Brand: Metra Electronics Pages: 12
Black Horse Off Road TR-JECOOE Installation Instructions preview
TR-JECOOE
Brand: Black Horse Off Road Pages: 3

Brands by name

Popular brands

Load more brands