manualshive.com logo in svg

Hyundai 2008 Tiburon, Owner'S Manual

The Hyundai 2008 Tiburon Owner's Manual is an essential resource for all Tiburon owners. This comprehensive manual covers every aspect of the vehicle, providing detailed information on maintenance, operation, and safety procedures. Download your free manual from manualshive.com and unlock a wealth of knowledge for your Hyundai Tiburon.

Share
Download
background image

F4

A110A01A-AAT

VEHICLE DATA COLLECTION AND EVENT DATA RECORDERS

Your Hyundai vehicle is equipped with many high technology, electronically controlled systems that
help to ensure your vehicle operates properly and provides the performance that you expect. These
systems utilize computers to monitor the operation of various systems and components and help to
control their operation.  These computerized system operations are wide-ranging and involve
components to reduce emissions, to continuously evaluate the readiness of the airbag and seat belt
pretensioner systems, to determine when the airbag and seat belt pre-tensioner systems should be
deployed and then to activate the deployment, and if equipped, to operate anti-lock braking, traction
control and electrical stability control to assist the driver to control the vehicle in difficult driving
situations. These systems electronically store information that is useful to service technicians when
they need to diagnose and repair these systems. Additional information is stored only when a crash
occurs that results in the deployment of the airbags or seat belt pre-tensioners.  This type of data storage
is done by devices called event data recorders (EDR).

After a crash event, the airbag and seat belt pre-tensioner computer system, known as the Supplemental
Restraint System Control Module (SRSCM) or Airbag Control Unit (ACU), may record some information
about the condition of the vehicle and how it was being operated.  This information consists of data
related to seat belt usage and if there was diagnostic information in the airbag or seat belt systems
at the time that a crash occurred, and if the ACU sensed that a crash of sufficient severity occurred to
require seat belt pre-tensioner or airbag deployment.

To retrieve this information, special equipment is needed and access to the vehicle or the device that
stores the data is required.  Hyundai will not access information about a crash event or share it with
others except:

o in response to an official request of police or similar government office, or
o with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee, or
o as part of Hyundai’s defense of litigation, or
o as required by law.

Summary of Contents for 2008 Tiburon













































































































































































































































































Reviews:

No comments

Related manuals for 2008 Tiburon

GARO TWIN+ Assembly Instructions / End User Instruction preview
TWIN+
Brand: GARO Pages: 23
GARO LS4 Wallmounted Operational Instructions preview
LS4 Wallmounted
Brand: GARO Pages: 15
Porsche Carrera GT Manual preview
Carrera GT
Brand: Porsche Pages: 192
HUSKY LINERS X-ACT CONTOUR 53491 Care And Use Instructions preview
X-ACT CONTOUR 53491
Brand: HUSKY LINERS Pages: 2
Volvo 30728293 Installation Instructions Manual preview
30728293
Brand: Volvo Pages: 19
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
Brodit ProClip 853660 Manual preview
ProClip 853660
Brand: Brodit Pages: 2
Power Fist 8985988 Manual preview
8985988
Brand: Power Fist Pages: 12
EAL EUFAB 16491 Operating Instructions Manual preview
EUFAB 16491
Brand: EAL Pages: 7
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Mazda 1989 323 Manual preview
1989 323
Brand: Mazda Pages: 13
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
mtf TRANSPORT SYSTEM BackPower Manual preview
BackPower
Brand: mtf TRANSPORT SYSTEM Pages: 9
Rugged Ridge 11252.51 Installation Instructions preview
11252.51
Brand: Rugged Ridge Pages: 3
Cadillac XT4 2022 Convenience/Personalization Manual preview
XT4 2022
Brand: Cadillac Pages: 20
Mercedes-Benz Vito Taxi 2011 Operation Manual preview
Vito Taxi 2011
Brand: Mercedes-Benz Pages: 10

Brands by name

Popular brands

Load more brands