manualshive.com logo in svg

Hyundai 2008 Tiburon, Owner'S Manual, Page: 112 / 268

Share
Download
Hyundai 2008 Tiburon Owner'S Manual Download Page 112

1

FEATURES OF YOUR HYUNDAI

100

Floor-Defrost Level

When selecting the "Floor-Defrost" mode, the
indicator light will come on and the air will be
discharged through the windshield defrost
nozzle, the floor vents, side defroster nozzle,
side ventilator.

OGK016098

B980F01GK-AAT

Defrost Switch

When the "Defrost" button is pressed, the "      "
mode will be automatically selected and the air
will be discharged through the windshield de-
frost vents. To assist in defrosting, the air
conditioning will operate if ambient temperature
is higher than 35.6°F (2°C) and automatically
turns off if the ambient temperature drops below
32.9 °F (0.5 °C).

OGK046060

Floor-Level

When selecting the "Floor-Level" mode, the
indicator light will come on and the air will be
discharged through the floor vents, windshield
defroster nozzle, side defroster nozzle, side
ventilator.

OGK016097

Summary of Contents for 2008 Tiburon













































































































































































































































































Reviews:

No comments