manualshive.com logo in svg

Hyundai 2008 Tiburon, Owner'S Manual

The Hyundai 2008 Tiburon Owner's Manual is an essential resource for all Tiburon owners. This comprehensive manual covers every aspect of the vehicle, providing detailed information on maintenance, operation, and safety procedures. Download your free manual from manualshive.com and unlock a wealth of knowledge for your Hyundai Tiburon.

Share
Download
background image

6

DO-IT-YOURSELF MAINTENANCE

21

!

CHECKING ELECTRIC COOLING
FANS

!

G220A01A-AAT

WARNING:

The cooling fan is controlled by engine
coolant temperature and may sometimes
operate even when the engine is not run-
ning. Use extreme caution when working
near the blades of the coolant fan, so that
you are not injured by a rotating fan blade.
As the engine coolant temperature de-
creases the fan will automatically shut off.
This is a normal condition.

If electrolyte gets on your skin,
thoroughly wash the contacted
area.
If you feel a pain or a burning
sensation, get medical attention
immediately.

Wear eye protection when charg-
ing or working near a battery.
Always provide ventilation when
working in an enclosed space.

o When lifting a plastic-cased battery, ex-

cessive pressure on the case may cause
battery acid to leak, resulting in personal
injury. Lift with a battery carrier or with
your hands on opposite corners.

o Never attempt to charge the battery when

the battery cables are connected.

o The electrical ignition system works with

high voltage.
Never touch these components with the
engine running or the ignition switched
on.

WARNING:

G220C01A-AAT

Checking Condenser Cooling Fan

The condenser coolant fan should come on
automatically whenever the air conditioning is in
operation.

G220B01A-AAT

Checking Engine Cooling Fan

The engine cooling fan should come on auto-
matically if the engine coolant temperature is
high.

POWER STEERING FLUID LEVEL

G230A04A-AAT

The power steering fluid level should be checked
regularly. To check the power steering fluid
level, be sure the engine is "OFF", then check
to make certain that the power steering fluid
level is between the "MAX" and "MIN" level
markings on the fluid reservoir.

NOTE:

o Grinding noise from the power steering

pump may be heard immediately after
the engine is started in extremely cold
conditions (below - 4°F). If the noise
stops during warm up, there is no abnor-
mal function in the system. It is due to a
power steering fluid characteristic in
extremely cold conditions.

o Do not start the engine when the power

steering oil reservoir is empty.

HGK5011

Summary of Contents for 2008 Tiburon













































































































































































































































































Reviews:

No comments

Related manuals for 2008 Tiburon

Vintage Air 561163 Manual preview
561163
Brand: Vintage Air Pages: 28
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
Dacia 2014 Sandero Driver'S Handbook Manual preview
2014 Sandero
Brand: Dacia Pages: 238
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
BrandMotion FLTW-7690 Installation Instructions preview
FLTW-7690
Brand: BrandMotion Pages: 2
SuperATV Roof Installation Instructions Manual preview
Roof
Brand: SuperATV Pages: 7
Dakota Digital CRS-3000-3 Manual preview
CRS-3000-3
Brand: Dakota Digital Pages: 20
Ford Focus 2008 Quick Reference Manual preview
Focus 2008
Brand: Ford Pages: 2
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
WABCO TEBS E Manual preview
TEBS E
Brand: WABCO Pages: 224
Magneti Marelli Obd Road User Manual preview
Obd Road
Brand: Magneti Marelli Pages: 9
Chevrolet LUMINA 1995 Owner'S Manual preview
LUMINA 1995
Brand: Chevrolet Pages: 324
Directed Directechs FORD11 Installation Manual preview
Directechs FORD11
Brand: Directed Pages: 23
AEV AEV30348AC User Manual preview
AEV30348AC
Brand: AEV Pages: 16
Truma Mover smart M Operating Instructions Manual preview
Mover smart M
Brand: Truma Pages: 84

Brands by name

Popular brands

Load more brands