manualshive.com logo in svg

Hyundai 2008 Tiburon, Owner'S Manual

The Hyundai 2008 Tiburon Owner's Manual is an essential resource for all Tiburon owners. This comprehensive manual covers every aspect of the vehicle, providing detailed information on maintenance, operation, and safety procedures. Download your free manual from manualshive.com and unlock a wealth of knowledge for your Hyundai Tiburon.

Share
Download
background image

6

DO-IT-YOURSELF MAINTENANCE

20

!

WARNING:

Always read the following in-
structions carefully when han-
dling a battery.

Keep lighted cigarettes and all
other flames or sparks away from
the battery.

Hydrogen, which is a highly com-
bustible gas, is always present in
battery cells and may explode if
ignited.

Keep batteries out of the reach of
children because batteries con-
tain highly corrosive SULFURIC
ACID. Do not allow battery acid
to contact your skin, eyes, cloth-
ing or paint finish.

If any electrolyte gets into your
eyes, flush your eyes with clean
water for at least 15 minutes and
get immediate medical attention.
If possible, continue to apply
water with a sponge or cloth until
medical attention is received.

o If battery fluid is on your skin, flush the

affected areas with water for at least 15
minutes and then seek medical assistance.

o If battery fluid is in your eyes, rinse out your

eyes with water and get medical assistance
as soon as possible. While you are being
driven to get medical assistance, continue to
rinse your eyes by using a sponge or soft
cloth saturated with water.

o If you swallow battery fluid, drink a large

quantity of water or milk followed by milk of
magnesia, eat a raw egg or drink vegetable
oil. Get  medical assistance as soon as
possible.

While batteries are being charged (either by a
battery charger or by the vehicle’s generator),
they produce explosive gases. Always ob-
serve these warnings to prevent injuries from
occurring:

o Charge batteries only in a well ventilated

area.

o Do not permit flames, sparks or smoking in

the area.

o Keep children away from the area.

!

G210B03A-AAT

Checking the Battery

Keep the battery clean. Any evidence of corro-
sion around the battery posts or terminals
should be removed using a solution of house-
hold baking soda and warm water. After the
battery terminals are dry, cover them with a light
coating of grease.

PROPOSITION 65 WARNING:

Battery posts, terminals, and related acces-
sories contain lead and lead compounds,
chemicals known to the state of California
to cause cancer and reproductive harm.
Batteries also contain other chemicals
known to the state of California to cause
cancer. Wash hands after handling.

Summary of Contents for 2008 Tiburon













































































































































































































































































Reviews:

No comments

Related manuals for 2008 Tiburon

Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
WABCO TP2205 Installation Manual preview
TP2205
Brand: WABCO Pages: 48
Wilco Offroad UHG2060/AU Installation Manual preview
UHG2060/AU
Brand: Wilco Offroad Pages: 4
Alfa Romeo Alfa 147 Quick Start Manual preview
Alfa 147
Brand: Alfa Romeo Pages: 8
Mercedes-Benz 2015 SLK Operator'S Manual preview
2015 SLK
Brand: Mercedes-Benz Pages: 358
Camecho R0009 Instructions preview
R0009
Brand: Camecho Pages: 2
Eibach E60-82-007-02-10 Installation Instructions preview
E60-82-007-02-10
Brand: Eibach Pages: 3
Havis-Shields 1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P Datasheet preview
1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P
Brand: Havis-Shields Pages: 1
MVG 0845 C Manual preview
0845 C
Brand: MVG Pages: 18
Omix-Ada Alloy Rugged Ridge X-Clamp Manual preview
Alloy Rugged Ridge X-Clamp
Brand: Omix-Ada Pages: 2
Dodge 8W-70 Wiring Diagram preview
8W-70
Brand: Dodge Pages: 3
Waeco MagicSafe MSG150 Installation And Operating Manua preview
MagicSafe MSG150
Brand: Waeco Pages: 20
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2
Whispbar K730W Fitting Instructions Manual preview
K730W
Brand: Whispbar Pages: 14
Ecco Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600 Manual preview
Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600
Brand: Ecco Pages: 2
RAM TRUCK 2500 2017 Owner'S Manual Supplement preview
TRUCK 2500 2017
Brand: RAM Pages: 33
Kargo Master PRO-II KS Assembly Instructions Manual preview
PRO-II KS
Brand: Kargo Master Pages: 8

Brands by name

Popular brands

Load more brands