manualshive.com logo in svg

Hyundai 2008 Tiburon, Owner'S Manual

The Hyundai 2008 Tiburon Owner's Manual is an essential resource for all Tiburon owners. This comprehensive manual covers every aspect of the vehicle, providing detailed information on maintenance, operation, and safety procedures. Download your free manual from manualshive.com and unlock a wealth of knowledge for your Hyundai Tiburon.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

23

Vehicle capacity weight:

700 lbs (317 kg)
Vehicle capacity weight is the maxi-
mum combined weight of occupants
and cargo. If your vehicle is equipped
with a trailer, the combined weight in-
cludes the tongue load.

Seating capacity:

Total: 4 persons

(Front seat: 2 persons,

 Rear seat: 2 persons)

Seating capacity is the maximum num-
ber of occupants including a driver,
your vehicle may carry.
However the seating capacity may be
reduced based upon the weight of all of
the occupants, and the weight of the
cargo being carried or towed. Do not
overload the vehicle as there is a limit
to the total weight, or load limit including
occupants and cargo, the vehicle can
carry.

(3)Subtract the combined weight of the

driver and passengers from XXX
kilograms or XXX pounds.

(4)The resulting figure equals the avail-

able amount of cargo and luggage
load capacity. For example, if the
"XXX" amount equals 1400 lbs, and
there will be five 150 lb. passengers
in your vehicle, the amount of avail-
able cargo and luggage load capac-
ity is 650 lbs. (1400-750 (5 x 150) =
650  lbs.)

(5)Determine the combined weight of

luggage and cargo being loaded on
the vehicle. That weight may not
safely exceed the available cargo
and luggage load capacity calcu-
lated in Step 4.

(6)If your vehicle will be towing a trailer,

load from your trailer will be trans-
ferred to your vehicle. Consult this
manual to determine how this re-
duces the available cargo and lug-
gage load capacity of your vehicle.

Towing capacity:

Towing capacity is the maximum trailer
weight including its cargo weight, your
vehicle can tow. See the section "Trailer
or Vehicle Towing" for specifications
about the trailer weight.

Cargo capacity:

The cargo capacity of your vehicle will
increase or decrease depending on the
weight and the number of occupants
and the tongue load, if your vehicle is
equipped with a trailer.

Steps for Determining Correct Load
Limit

(1)Locate the statement "The combined

weight of occupants and cargo should
never exceed XXX kilograms or XXX
pounds'' on your vehicle's placard.

(2)Determine the combined weight of

the driver and passengers that will be
riding in your vehicle.

Summary of Contents for 2008 Tiburon













































































































































































































































































Reviews:

No comments

Related manuals for 2008 Tiburon

Accel 2020 Installation Instructions preview
2020
Brand: Accel Pages: 2
Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
Roadmaster Sterling ALL-TERRAIN 576 Owner'S Manual & Installation Instructions preview
Sterling ALL-TERRAIN 576
Brand: Roadmaster Pages: 12
Ford FIESTA ST 2019 Supplement Manual preview
FIESTA ST 2019
Brand: Ford Pages: 37
Honda 08A28-0J6-800 Installation Instructions Manual preview
08A28-0J6-800
Brand: Honda Pages: 32
Raptor Series MAGNUM RT Series Manual preview
MAGNUM RT Series
Brand: Raptor Series Pages: 6
DFI VC230-BT Installation Manual preview
VC230-BT
Brand: DFI Pages: 6
Skoda KAROQ 2017 Owner'S Manual preview
KAROQ 2017
Brand: Skoda Pages: 324
TOPPOINT LT95090 Quick Start Manual preview
LT95090
Brand: TOPPOINT Pages: 2
Whispbar K723W Fitting Instructions Manual preview
K723W
Brand: Whispbar Pages: 77
Lexus 2015 LX 570 Settings User Manual preview
2015 LX 570
Brand: Lexus Pages: 6
Brodit Heavy Duty ProClip Installation Instructions preview
Heavy Duty ProClip
Brand: Brodit Pages: 2
Yakima K682 Instructions Manual preview
K682
Brand: Yakima Pages: 10
Chevrolet 2001 Cavalier Owner'S Manual preview
2001 Cavalier
Brand: Chevrolet Pages: 357
FAAFTECH FT-RC-RN Installation Manual preview
FT-RC-RN
Brand: FAAFTECH Pages: 2
Directed Directechs FORD11 Installation Manual preview
Directechs FORD11
Brand: Directed Pages: 23

Brands by name

Popular brands

Load more brands