1. LIGHT GUARD
2. NUT
3. STROBE LIGHT ASSEMBLY
4. BRACKET
5. SPACER
6. CAPSCREW
7. ELECTRICAL CONNECTOR
Figure 32. Strobe Light Assembly
Install
1.
Install new strobe light assembly, light guard,
capscrews, and nuts onto bracket. See Fig-
ure 32.
2.
Connect strobe light electrical connector to
overhead guard harness as tagged during re-
moval. See Figure 32.
3.
Connect the battery. Close the hood.
LED TAIL, BACKUP, AND BRAKE LIGHTS
NOTE:
These light assemblies are non-repairable
and must be replaced as an assembly. See Parts
Manual for replacement strobe light part numbers.
Remove
1.
Raise the hood. Disconnect the battery.
2.
Remove the key.
NOTE:
Tag electrical connector prior to disconnect
to aid in correct reconnect.
3.
Disconnect the LED light from light harness.
See Figure 33.
4.
Remove screw, LED light, and clip nut from
mounting bracket. Pull LED light downward to
remove it from mounting bracket. See Fig-
ure 33.
Lights
2200 SRM 1771
30
