7.
Disconnect Display Switch Cluster harness
from display panel. Remove harness from steer-
ing column.
8.
Remove four bolts (1, Figure 9) holding steering
column to cowl.
9.
Raise steering column to disengage steering
shaft from steering control unit.
DISASSEMBLE
1.
Remove steering shaft retention clip. See Fig-
ure 9.
2.
Remove horn contact pads. See Figure 9.
1. BOLTS
2. PIVOT BOLTS
3. HORN WIRES
4. STEERING SHAFT RETENTION CLIP
5. HORN HARNESS
6. STEERING COLUMN
7. GAS CYLINDER
8. COWL
9. LOWER STRUT PIVOT PIN
10. HYDRAULIC CONTROL VALVE
11. STEERING CONTROL UNIT (SCU)
12. STEERING SHAFT
13. HORN CONTACT PADS
Figure 9. Steering Column
3.
Remove lower strut pivot pin from gas cylinder.
See Figure 9.
4.
Remove steering column pivot bolts and steer-
ing shaft. See Figure 9.
2200 SRM 1771
Steering Column Repair
9
