1. CAPSCREWS
2. SEAT SENSOR
3. SEAT SENSOR ELECTRICAL CONNECTOR
4. SEAT GROUND WIRE
5. SEAT HARNESS
Figure 19. Seat Sensor, Non-Suspension Seat
Install
1.
Insert two capscrews and install sensor to seat.
See Figure 19.
2.
Connect new seat sensor connector to seat har-
ness as tagged during removal.
3.
Install seat onto hood using four capscrews and
washers in the correct holes as marked during
removal (see Figure 18). Tighten capscrews to
18 N•m (156 lbf in). See Figure 17.
4.
Connect seat harness to wire harness as tagged
during removal.
5.
Install electrical cover to cover plate using two
capscrews and washers. See Figure 17.
6.
Connect the battery and close the hood.
Full Suspension Seats
Remove
1.
Disconnect the battery.
2.
Pull out two pins that secure bottom seat cush-
ion to seat base.
3.
Lift bottom seat cushion up and disconnect the
seat harness from seat sensor. See Figure 20.
4.
Use a small, flat-bladed screwdriver and re-
move the seat sensor from seat base.
1. SEAT SENSOR
2. CUSHION PINS
3. SEAT HARNESS
4. SEAT BASE
5. TO CHASSIS HARNESS
Figure 20. Seat Sensor, Full-Suspension Seat
Install
1.
Install new seat sensor into seat base.
2.
Connect seat harness to seat sensor. See Fig-
ure 20.
3.
Place bottom seat cushion onto seat base and
attach cushion to seat base with pins.
4.
Connect the battery.
Sensors and Switches
2200 SRM 1771
18