NOTE:
RIGHT SIDE SEAT HANDLE REMOVED
FOR CLARITY.
1. CAPSCREWS
2. WASHER
3. COVER PLATE
4. ELECTRICAL CONNECTOR (SEAT HARNESS)
5. ELECTRICAL COVER
6. HOOD
7. SEAT
Figure 17. Seat Removal, Non-Suspension Seat
4.
Disconnect seat harness from chassis harness.
NOTE:
Before removing seat from hood, tag or
mark the holes that mount the seat to the hood.
This will aid in correctly installing seat to hood. See
Figure 18.
5.
Remove the four capscrews and washers hold-
ing the seat to the hood. Remove seat from the
hood.
NOTE:
TOP VIEW OF HOOD SHOWN.
1. MOUNTING HOLES, NON-SUSPENSION SEAT
2. HOOD LATCH HANDLE
3. HOOD
4. HOOD HINGE ASSEMBLY
Figure 18. Seat Mounting Holes, Non-Suspension
Seat
NOTE:
Tag electrical connector prior to disconnect
to aid in correct reconnect.
6.
Disconnect the seat sensor electrical connector
form wire harness. See Figure 19.
7.
Remove two capscrews and seat sensor from
the seat.
2200 SRM 1771
Sensors and Switches
17