ACCELERATOR PEDAL POSITION
SENSOR
Remove
1.
To access the battery, raise the hood. Discon-
nect the battery.
2.
Remove upper steering column cover (see Dis-
play Switch Cluster) and the dash and kick
panel. See Dash Panel, Kick Panel, and Seal
Plate, Remove and Install.
3.
Remove lever bracket capscrews and move hy-
draulic lever assembly toward operator seat.
See Figure 11.
1. LEVER BRACKET CAPSCREWS
2. COWL
Figure 11. Hydraulic Control Valve Removal
NOTE:
Tag electrical connectors prior to disconnect
to aid in correct reconnect.
4.
Disconnect throttle position sensor from wiring
harness.
5.
Remove three bolts, throttle base, and pedal as-
sembly from cowl. See Figure 12.
1. BOLTS
2. PEDAL ASSEMBLY
3. COWL
Figure 12. Accelerator Pedal and Throttle Base
Removal
6.
Remove two pan head screws, two lockwashers,
and throttle position sensor from throttle base.
See Figure 13.
Sensors and Switches
2200 SRM 1771
12
