© 2022 HyQuest Solutions
30
Configuration
3
Configuration
The iRIS configuration is done by iLink or HydroTel. This description assumes a computer running the Microsoft®
Windows® operating system is being used and all examples relate to the configuration tool in iLink 3. The following
sections show the configuration using iLink 3 installed on a Microsoft® Windows® operating system.
For more information, see the following subsections:
§
Connecting to the iRIS 270 with iLink Desktop software via Wi-Fi (Windows 10)
§
§
Changing the Wi-Fi password with iLink Desktop software via Wi-Fi (Windows 10)
§
§
§
Using iLink’s Sensor Configuration Tool
§
§
3.1
Connecting to the iRIS 270 with iLink Desktop software via Wi-Fi
(Windows 10)
The first step is to establish a Wi-Fi connection between the PC and the iRIS.
On the iRIS press and hold the Wi-Fi/Enter button for
3 seconds until a beep, then release.
Wait for a second beep (lower tone) to indicate that
the iRIS Wi-Fi access point is operating.
On PC/Laptop select the SSID that matches the iRIS you
are connecting to.
Note
: Refer to connecting devices documentation on
how to establish a Wi-Fi connection to an access point.
The example shown here is for Windows 10.
30
31
32
33
62
64
68
85
