Page 26
6.2.3 Control settings
The control behaviour of the control is set in
the next step. The following variants are
offered for selection on the screen: 1 step
operation (on/off control) or the use of the
internal PI controller. If the unit was already
factory-preset according to customer require-
ments, the selection tick appears in the
"User-defined" line.
The parameters are displayed in blocks on a
screen page, which include a maximum of 4
entries. Scroll icons are used to switch
between the individual display blocks.
»
Confirm the input and return to the
"Commissioning" screen with the
green tick in the top right (cancel by
tapping on "X").
»
Tapping the green tick in the top
right again saves the entries and
exits the commissioning screen
(cancel by pressing the "X" in the
top left).
The commissioning is now complete. If the
commissioning screen was exited with the
confirmation tick, the main screen is now
shown in the display.
The commissioning screen is no longer dis-
played in future. Changes which are made at
a later stage to the parameters listed during
commissioning must then be performed at
the operator level in the "Settings" and "Con-
trol" submenus.
Control settings
User specified
1 step
PI controller
X
Scroll keys
Abort
Confirm and
save
